Straplock nickel
 Delivery: 5-10 working days |
|
|
Straplock black
Delivery: 5-10 working days |
|
|
Straplock gold
Delivery: 5-10 working days |
|
|
The BTC Control features a bass and treble equalizer on a concentric (stacked) pot. It takes up very little space and will work with any pickup, active or passive. It comes complete with knobs (including 2 extra volume knobs). BTC Controls and Systems are the most widely used bass EQ Systems in the world. Approximately 12db of cut and boost are available for bass and treble and all controls are center detented to assure quick return to normal tone settings. A dual-dip switch is mounted to the PC Board that lets you program the high end frequency response four different ways so you can choose the sound that's right for you. These systems use the latest in surface mount technology, are extremely quiet, and require very little current from a 9 Volt battery.
Delivery: 5-10 working days |
|
|
Prewired 25K ohm split shaft volume/tone control set, output jack, battery clip set (screws & springs-not included)
Delivery: 5-10 working days |
|
|
Delivery: 5-10 working days |
|
|
For flexibility in tone at your fingertips there is no better choice than the EXG Guitar Expander. The frequency response of the EXG is similar to normal guitar amp equalization. The lows and highs are boosted while the midrange is dipped out. The EXG is great for creating a fuller tone that doesn't get muddy, while keeping it clean and clear, letting your guitar stand out in the mix.
Delivery: 5-10 working days |
|
|
The Pi2 is an active phase reversal circuit mounted on a mini-toggle switch, and is used in guitars with two or more EMG Pickups. Wired in series with one of the pickups, The Pi2 produces true "out of phase" sound by reversing the phase of the pickup. The active method of phase reversing is superior because it maintains the quietness of an EMG equipped instrument. It requires the same amount of space as a conventional phase switch, and only four solder connections are necessary. Along with the Pi2, mounting hardware and complete instructions are included to make installation easy.
Delivery: 5-10 working days |
|
|
The SPC or "Strat Presence Control" is often called the fat control. The original intent of the SPC was to turn the tone of a single-coil pickup into a dual-coil. This is accomplished by boosting the gain in a broad mid-band fashion and reducing the highs. The result is a fatter, louder tone from any single coil pickup, but you can also use it on a humbucking to give you a high output, really fat tone that's great for slide guitar.
Delivery: 5-10 working days |
|
|
Ez Fit EZ1789G
Delivery: 5-10 working days |
|
|
BJ-1015-H4 - 10 15/16" Banjo head - Cloudy finish
 Delivery: On request |
|
|
BJ-1012-H1 - 10 3/4" Coated Top Banjo Head-High Collar
Delivery: On request |
|
|
BJ-1012-M1 - 10 3/4" Coated Top Banjo Head-Medium Collar
Delivery: On request |
|
|
BJ-1015-M1 - 10-15/16" Banjo head, coated topside
Delivery: On request |
|
|
BJ-1100-L1 - 11" Coated Top Banjo Head-Low Collar
Delivery: 5-10 working days |
|
|
BJ-1100-M1 - 11" Coated Top Banjo Head-Medium Collar
Delivery: 5-10 working days |
|
|
BJ-1100-M2 - 11" Bottom Coated Banjo Head-Medium Collar
Delivery: 5-10 working days |
|
|
BJ-1100-H5 - 11" Fiberskyn 2 Banjo Head - High Collar
 Delivery: 3-5 working days |
|
|
BJ-1100-M3 - 11" Clear Banjo Head-Medium Collar
Delivery: 5-10 working days |
|
|
BJ-1102-H1 - 11 1/8" Coated Top Banjo Head-High Collar
Delivery: 5-10 working days |
|
|
BJ-1102-L1 - 11 1/8" Coated Top Banjo Head-Low Collar
Delivery: On request |
|
|
BJ-1102-M1 - 11 1/8" top coated banjo head - medium collar
Delivery: 5-10 working days |
|
|
BJ-1102-M3 - 11 1/8" clear banjo head - medium collar
Delivery: 5-10 working days |
|
|
KG3563L+3R Machine heads for Classical guitars w/slotted peghead and 35 mm string roller spacing - 3/8" dia. string roller sleeves - pearlescent plastic knobs - nickel finished "lyra" plates.
 Delivery: Expected 14-02-2012 |
|
|
KG3603L+3R Machine heads for Classical guitars w/slotted peghead and 35 mm string roller spacing - 3/8" dia. string roller sleeves - pearlescent plastic knobs - - gold finished "lyra plates.
Delivery: 5-10 working days |
|
|
Yellow parts black pickguard
Delivery: 5-10 working days |
|
|
Yellow Parts EZ1111T pickguard
Delivery: 5-10 working days |
|
|
