Welcome at DWmusicstore! The biggest online music store of the Netherlands, and the place to be if you are in search of guitars, basses, amplifiers, drums, percussion, studio gear, DJ gear, keyboards, synthesizers, wind instruments and more...

Dunlop D42MS mic support for iPad2

Euromet 7316. Mic Stand

Euromet 7897.

Euromet AR1

Adjustable Wall support Arm length 260mm.

Euromet S122NB

Euromet S122SB.

HK Audio Pack1 Nano stand, 2 cables, 2 tubes

Strength and stability! A clever way to show off your iPad. The new mount is guaranteed to hold the iPad effectively and safely. For use on stage, in the rehearsal room or at home - the 3/8" internal thread means the holder can be attached to any microphone stand easily and quickly. The iPad is clipped in and out of the holder effortlessly. An easy-to-use wing nut adjusts the tilt so the user can easily find a position to suit them. The iPad can be rapidly switched between the vertical and horizontal format, whereby slip is prevented.

A microphone stand in a two-piece folding design that extends to over 4 m and as such is very suitable for organ and choir recordings. There is an extra safety ring lock for stability. The extension tube has a 1/2" thread connector. The stand can optionally be combined with boom arm 21231.

K&m of 23266 round bases - casting bases with sound absorption and 3/8" " screw mounting H: 55mm, 

KM 23280, small, tabletop microphone stand, round glass base. Anti-vibration rubber bumps for noise filtration. Stainless steel threaded bolt, 3/8" thread connection. Weight: 0.3 kg, H: 70 mm, base-diameter 110 mm 

K&M 23510 The flexible microphone bar for microphone stands. Two moveable bars position the microphone where ever you would like it. Each bar is fitted with a captive knurled screw. The entire bar can be screwed onto all standard microphone stands with a 3/8" threaded connector.

KM 23770, small, lightweight, 4-piece glass fibre rod combination, extra long, supports 0.5 kg, microphone cable can be routed through the tubing. Padded, anti-slip grip section. Folds compactly into a practical carrying case, weight: 0.8 kg, H: 1200/4600 mm.

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 6 m long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 1.5 kg are easily held in any position. The clamping width of 0 to 53 mm allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.

Extra low design for bass drums or special use. Very short and heavy legs provide maximum stability. Legs are foldable for easy transport. Comes with two-piece boom arm 21140.

Stable steel stand for monitors with broad completely level round cast-iron base-diameter 450 mm. Rod combination height adjustable using clamping screw and safety splint. For the direct attachment of monitors with 3/8" threaded joint (thread length 12 mm) or to screw in a connector plate 205 x 245 mm for Genelec monitor 1030 or monitors by other manufacturers. Includes 4 thread points and 4 rubber knobs.

Martin Audio AQCL, long ceiling holder for AQ8/10/12

Martin Audio AQCS, short ceiling holder for AQ8/10/12

Martin Audio M10 holder

14-Space Steel Studio Rack

Perforated Metal Top for RS500 Racks

Roland ST CMS1 Cube Monitor stand

Microphone Stand Straight

Microphone Stand round bottom, flex top

Short microphone stand

Microphone stand

Boomarm pro for MDX stand

Amp/Monitor Stand adjustable

Rack 19"

Stand for alto sax

Mic stand, table version, ideal for presentation

Studio monitor stand (pair)

Studioboom mic stand

MUS-A2 BK - Lyra collapsible music stand - 2 sections - Height range : 65 to 105 cm / 25.6 x 41.3 in. - Weight : 0.85 Kg/ 1.9 lb - Dimensions when folded : 58 x 5 x 5 (cm) / 22.8 x 2 x 2 in. - Carrying bag included - Colour: Black.

MUS-A3 BK - Standard, Lyra collapsible music stand - 3 section - Height range : 50 to 115 cm / 19.7 x 45.3 in. - Weight : 1 Kg / 2.2 lb - Dimensions when folded : 53x9x6 (cm) / 20.9 x 3.5 x 2.4 in. - packed in a bag. spare parts: (1) rubber feet / (2) lower clamp sleeve/ (3) upper clamp sleeve/ (4) locking screw for - Colour: Black.

MUS-A4 BK - Lyra collapsible tubular music stand - 3 section - Height range: 55 to 125 cm / 21.6 to 49.2 in - Weight: 1.4Kg / 3 lb - Dimensions when folded: 48 x 9 x 8 (cm) / 18.9 x 3.5 x 3.1 - Carrying bag included - Colour: Black.

MUS-A3 BL - Standard, Lyra collapsible music stand - 3 section - Height range : 50 to 115 cm / 19.7 x 45.3 in. - Weight : 1 Kg / 2.2 lb - Dimensions when folded : 53x9x6 (cm) / 20.9 x 3.5 x 2.4 in. - packed in a bag. spare parts: (1) rubber feet / (2) lower clamp sleeve/ (3) upper clamp sleeve/ (4) locking screw for - Colour: Blue.

MUS-A3 CR - Standard, Lyra collapsible music stand - 3 section - Height range : 50 to 115 cm / 19.7 x 45.3 in. - Weight : 1 Kg / 2.2 lb - Dimensions when folded : 53x9x6 (cm) / 20.9 x 3.5 x 2.4 in. - packed in a bag. spare parts: (1) rubber feet / (2) lower clamp sleeve/ (3) upper clamp sleeve/ (4) locking screw for - Colour: Chrome.

MUS-A4 CR - Lyra collapsible tubular music stand - 3 section - Height range: 55 to 125 cm / 21.6 to 49.2 in - Weight: 1.4Kg / 3 lb - Dimensions when folded: 48 x 9 x 8 (cm) / 18.9 x 3.5 x 3.1 - Carrying bag included - Colour: Chrome.

MUS-A3 RD - Standard, Lyra collapsible music stand - 3 section - Height range : 50 to 115 cm / 19.7 x 45.3 in. - Weight : 1 Kg / 2.2 lb - Dimensions when folded : 53x9x6 (cm) / 20.9 x 3.5 x 2.4 in. - packed in a bag. spare parts: (1) rubber feet / (2) lower clamp sleeve/ (3) upper clamp sleeve/ (4) locking screw for - Colour: Red.

GAS-5 - Adjustable amplifier/ monitor stand - Steel tubing construction - Foldable legs w/ rubber feet - Height adjustable in 4 steps secured by a locking pin and a large screw - Base size (W x D): 48 x 55 cm ( 18.9 x 21.65 in.) - Height range: 26 to 34 cm (10.2 to 13.4 in.) - Support Width: 29.5 c -