Hartke has taken its experience in building great sounding bass amplifiers and brought it to the field of acoustic guitar amplification with the introduction of the Hartke Acoustic Ribbon Series. Perfect to go from the coffee house to the night club, the AC150 is a two channel 150 watt acoustic guitar combo. Designed in a precision tuned Kickback™ enclosure, with four custom-voiced 5-inch full ranged drivers arranged in stereo, and a 2-inch by 4-inch ribbon tweeter, the AC150 naturally recreates the sound of the acoustic instrument without adding any unwanted coloration or distortion. Channel 1 has active and piezo instrument inputs, with bass and treble controls, while channel two has XLR microphone and RCA line inputs. There is a 5-band graphic EQ and a built-in 100 preset 24-bit stereo digital effects processor, which can be routed to either channel. The AC150 features a 150 watt tri-amped design, with 50 watts powering the left and right full range speakers and 50 watts powering the high frequency ribbon tweeter. To reduce feedback, there is a phase switch on channel 1 as well as a variable notch filter with depth control. On the rear panel of the amplifier there is an effects loop with stereo return, and stereo XLR direct outputs.
Hartke has taken its experience in building great sounding bass amplifiers and brought it to the field of acoustic guitar amplification with the introduction of the Hartke Acoustic Ribbon Series. Perfect to go from the coffee house to the night club, the AC75 is a two channel 75 watt acoustic guitar combo. Designed in a precision tuned Kickback™ enclosure, with two custom-voiced 5-inch full range drivers which naturally recreate the sound of the acoustic instrument without adding any unwanted coloration or distortion, and a 2-inch by 4-inch ribbon tweeter which adds clarity and overtones to the high end. Channel 1 has active and piezo instrument inputs, with bass and treble controls, while channel two has XLR microphone and RCA line inputs. There is a 5-band graphic EQ and a built-in 100 preset 24-bit digital effects processor, which can be routed to either channel. The AC75 features a 75 watt bi-amped design, with 50 watts powering the full range speakers and 25 watts powering the high frequency ribbon tweeter. To reduce feedback, there is a phase switch on channel 1 as well as a variable notch filter with depth control. On the rear panel of the amplifier there is an effects loop, and XLR direct outputs.
Although there are many acoustic amps on the market today, few of them can compete with the rich, natural tone of the compact AC-60 Acoustic Chorus amplifier. This innovative stereo amp uses sophisticated digital signal processing to deliver a crisp sound with lush stereo/multi-band chorus-including a new "wide" mode-plus delay/reverb and impressive Auto Anti-Feedback control. And with its 2-channel Mic/Line design and stand-mountable configuration, the AC-60 is clearly heads above the competition.
Compact stereo acoustic amplifier with pure, natural tone and excellent projection
2-Channel design: Guitar input and Mic/Line input with Phantom Power
Stereo 30-watt/dual 6.5-inch speaker configuration loud enough for club gigs and small PA applications
Onboard DSP delivers lush stereo/multi-band chorus, newly developed "wide" chorus and delay/reverb with footswitch control
Built-in Auto Anti-Feedback controls allow for maximum volume without feedback
Convenient Mute switch for silent tuning on stage
Stereo Line Out for PA and recording applications, Subwoofer output
Built-in tilt stand offers better acoustic projection, can also be mounted on commercially available speaker stands
Roland AC-60RW Acoustic Amplifier
This innovative stereo amp uses sophisticated signal processing to deliver a crisp sound with lush stereo/multi-band chorus including Wide mode plus delay/reverb and impressive Auto Anti-Feedback control. And with its two-channel Mic/Line design and stand-mountable configuration, the AC-60 is clearly heads above the competition.
The highly anticipated addition to Roland's AC-series amp family has arrived! Loaded with high-performance neodymium speakers and 90 watts of power, the AC-90 provides a rich, powerful sound while remaining lightweight for easy transport. The AC-90 employs a stereo 2-way speaker system that delivers transparent highs - great for the built-in multi-band stereo chorus - while also providing incredibly powerful low-frequency performance.
Roland AC33RW Acoustic Amplifier
The AC-33 is the world’s first battery-powered amp made specifically for acoustic guitar. Portable yet powerful, the AC-33 provides true stereo sound, Guitar and Mic/Line channels, custom-tailored effects, anti-feedback, and a Phrase Looper. Thanks to its battery-power capability, the AC-33 lets you take your act anywhere: into the backwoods, onto the streets, or wherever your imagination leads you.
Plug into instant audio entertainment with the new MOBILE CUBE amplifier. Small and mighty, this little stereo amp can handle all types of electronic instruments and audio devices, and can be used anywhere, anytime. Connect microphones, electric and acoustic guitars, keyboards, drum machines, MP3 players, you name it, and jam for up to 15 hours.
Battery-powered amplifier for anyone, anywhere, anytime
5W (2.5W + 2.5W) stereo power with two high-performance 10cm (4") speakers
Inputs for microphone, stereo-instrument, and stereo AUX; headphone output
Center Cancel function for karaoke
Built-in stereo reverb/chorus, distortion and more
VOX AGA150, acoustic guitar amp with tube preamp (12AU7), 150 watts RMS into 4 ohms, 6.5" full-range custom speaker, + 1x1" dome tweeter, 2 channels "Tube Pre" and "Normal" with each 1 guitar- and 1 microphone input (microphone optional with 15V phantompower), 3-Band EQ and additional color control, adjustable reverb, switchable chorus, LINE IN/AUX IN inputs, input for optional 2-button footswitch VFS2 (effects chorus/reverb on/off (mute), dimensions: 373 x 262 x 331 mm, weight: 10,3 kg
Acoustic guitar amplifier featuring two channels: Normal and Tube Pre
Each channel offers two inputs: Guitar (phone) and Mic (XLR)
Lo-Z and Hi-Z level switch on each input; Mic inputs can provide phantom power
Tube Pre channel is equipped with a 12AU7 vacuum tube, producing a warm and natural sound
Three-band EQ on each channel Bass, Middle, Treble
COLOR feature provides convenient single-knob control of the overall sound, emphasizing a wide range of performance techniques from picking arpeggios to strumming chords
High quality effects are provided for each channel; selectable Chorus and variable Reverb
Anti-Feedback control suppresses acoustic feedback
Full-range VOX 6.5" speaker is built in
Line inputs (Left & Right) allow a keyboard or other instrument to be connected directly
Stereo mini-jack MP3/CD input for jamming along, or for use as a portable PA system
DI output (balanced XLR) is available for using the AGA with a larger sound system; a tuner output is also provided.
Optional VFS2 provides footswitch control of the Effect Bypass and All Mute features
