Welcome at DWmusicstore! The biggest online music store of the Netherlands, and the place to be if you are in search of guitars, basses, amplifiers, drums, percussion, studio gear, DJ gear, keyboards, synthesizers, wind instruments and more...

Alto Professional TrueSonic 115W. The TS115W bring you all the premium features you've come to expect from Alto Professional: massive wattage, efficient Class D amplification and cutting-edge design. Add to all of this: unprecedented wireless connectivity. Now, you can harness that same massive wattage and clean, crystal clear sound using your iPad, iPhone or other Bluetooth-compatible device such as a laptop computer. Built-in Bluetooth A2DP wireless technology. Stream audio wirelessly from any Bluetooth-compatible device. Use as traditional PA loudspeaker or floor wedge monitor. 800 Watts Class D power. 15” low frequency transducer, 1” neodymium driver. Two mic/line combo inputs with independent volume controls. XLR output to link speakers. Lightweight, trapezoidal cabinet with handles. Stand/pole-mountable or flyable. Contour switch for increased EQ control. Clip Limiter with Red LED. Accurate audience coverage, not just on-axis

15" Passive Subwoofer System; 400 Watt Continuous (800W Program, 1600W Peak); 15” low frequency transducer, 3” voice coil; Two parallel Speakon NL4 jacks for input and thru connections, PASSIVE CROSSOVER ON THRU; Compact wood cabinet with metal handle

1000 Watt 2-way 10" Active Speaker System with Alesis DSP Technology 1000 Watt Class D power; Alesis DSP Technology; 10” neodymium LF driver; 1.75” titanium HF driver; 2 Mic/Line combo inputs with independent volume controls; XLR output to link speakers; Lightweight, trapezoidal cabinet with handles; Use as a traditional upright loudspeaker or as floor wedge monitor; 100 x 60 Long throw coverage field; Stand/pole mountable or flyablel; Clip Limiter with red LED; Ground Lift switch; Contour switch for increased EQ control; Accurate audience coverage, not just on-axis; Designed and tuned in the USA

Alto TS110A Active P.A. Speaker System
* 630 Watts Class D power * 10” low frequency transducer, 1” neodymium driver * 2 Mic/Line combo inputs with independent volume controls * XLR output to link speakers * Lightweight, trapezoidal cabinet with handles * Stand/pole mountable or flyable * Clip limiter with red LED * Ground lift switch * Contour switch for increased EQ control * Accurate audience coverage, not just on-axis * Use as traditional upright loudspeaker or as floor wedge monitor * Designed and tuned in the USA

1000 Watt 2-way 12" Active Speaker System with Alesis DSP Technology
1000 Watt Class D power; Alesis DSP Technology; 12” neodymium LF driver; 1.75” titanium HF driver; 2 Mic/Line combo inputs with independent volume controls; XLR output to link speakers; Lightweight, trapezoidal cabinet with handle; Use as a traditional upright loudspeaker or as floor wedge monitor; 100 x 60 Long throw coverage field; Stand/pole mountable or flyable; Clip Limiter with red LED; Ground Lift switch; Contour switch for increased EQ control; Accurate audience coverage, not just on-axis; Designed and tuned in the USA

Active 800 Watt 2-way 12" Speaker System with 1" Compression Driver

* 800 Watts Class D power * 12” low frequency transducer, 1” neodymium driver * 2 Mic/Line combo inputs with independent volume controls * XLR output to link speakers * Lightweight, trapezoidal cabinet with handles * Use as a traditional upright loudspeaker or as floor wedge monitor * Stand/pole mountable or flyable * Clip Limiter with Red LED * Ground Lift switch * Contour switch for increased EQ control * Accurate audience coverage, not just on-axis * Designed and tuned in the USA

1000 Watt 2-Way 15" Active Speaker System with Alesis DSP Technology
1000 Watts Class D power; Alesis DSP Technology; 15” neodymium LF driver; 1.75” titanium HF driver; 2 Mic/Line combo inputs with independent volume controls; XLR output to link speakers; Lightweight, trapezoidal cabinet with handles; Use as a traditional upright loudspeaker or as floor wedge monitor; 100 x 60 Long throw coverage field; Stand/pole mountable or flyable; Clip Limiter with red LED; Ground Lift switch; Contour switch for increased EQ control; Accurate audience coverage, not just on-axis; Designed and tuned in the USA

Active 800 Watt 2-Way 15" Active Speaker System with 1" Compression Driver
 * 800 Watts of Class D power * 15” low frequency transducer, 1” neodymium driver * 2 Mic/Line combo inputs with independent volume controls * XLR output to link speakers * Lightweight, trapezoidal cabinet with handles * Used as a traditional upright loudspeaker or as floor wedge monitor * Stand/pole mountable or flyable * Clip Limiter with red LED * Ground Lift switch * Contour switch for increased EQ control * Accurate audience coverage, not just on-axis * Designed and tuned in the USA

12" 600 Watt Compact Subwoofer
600 Watts of efficient Class D power; 12" woofer with 2.5" voice coil and double ventilation; Compact, rugged, 18mm birch cabinet; Dual XLR inputs and outputs for mono and stereo applications; Adjustable level and polarity controls; Integrated hi-pass / low-pass filter; Clip Limiter with red LED; Ground Lift switch

15" Sub with 1200 Watts of Earth Shaking Power
Extended low frequency, long-excursion 15" woofer; Explosive 1200W power provided by Class D switch mode power supply; 18mm birch plywood vented cabinet with metal grille and recessed handles
120Hz Crossover; Dual XLR inputs and outputs for mono and stereo applications; Adjustable level and polarity controls; 35mm pole socket

Alto 18" Sub with 1200 Watts of Earth Shaking Power Extended low frequency, long-excursion 15" woofer; Explosive 1200W power provided by Class D switch mode power supply; 18mm birch plywood vented cabinet with metal grille and recessed handles 120Hz Crossover; Dual XLR inputs and outputs for mono and stereo applications; Adjustable level and polarity controls; 35mm pole socket

HK Audio ADX112A 600 watts Active Box

HK Audio CTA118 Subwoofer

HK Audio EPX 112A Satellite 400W Rms

HK Audio EPX 115 Sub A

HK Audio IL60CTW active speaker 40w 100v

HK Audio IL60TB passive speaker Bi-Mode 40W RMS 8 Ohms pair

HK Audio L5 115FA Linear active speaker 15"/1" 1000Wrms

HK Audio 2000A Linear 5 active Subwoofer 2 x 12" 1200Wrms

PR:O 10 XA Frequency response +/- 3 dB 89 Hz - 19 kHz Frequency response -10 dB 67 Hz - 19 kHz Maximum SPL, @ 10% THD 121 dB Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced LF Speaker 10" HF Driver 1" Horn characteristics 90° x 60° CD horn Equalizer Tone control Subsonic filter 35 Hz Peak limiter yes RMS-Soundlimiter yes HF protection (passive) Dyn. protection circuit Amplifier 600 W class D - 4 ohms Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon Pole mount DuoTilt 3/7 Rigging points 3x M8 Handles 1, integrated Enclosure MDF Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 32 cm x 48 cm x 29 cm Weight 13,9 kg / 30.6 lbs.

PR:O 12 A Frequency response +/- 3 dB 85 Hz – 19 kHz Frequency response -10 dB 78 Hz – 19 kHz Maximum SPL, @ 10% THD 123 dB Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced LF Speaker 12" HF Driver 1" Horn characteristics 60° x 40° CD horn Equalizer Tone Control Subsonic filter 35 Hz Peak limiter yes RMS-Soundlimiter yes HF protection (passive) Dyn. protection circuit Amplifier 600 W class D – 4 ohms Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon Pole mount DuoTilt 3/7 Rigging points 3x M8 Handles 2, integrated Enclosure MDF Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 39 cm x 57 cm x 36 cm Weight 19,5 kg / 43 lbs.

PR:O 8 A Frequency response +/- 3 dB 89 Hz - 19 kHz Frequency response -10 dB 63 Hz - 19 kHz Maximum SPL, @ 10% THD 118 dB Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced LF Speaker 8" HF Driver 1" Horn characteristics 80° x 80° CD horn Equalizer Tone control Subsonic filter 35 Hz Peak limiter yes RMS-Soundlimiter yes HF protection (passive) Dyn. protection circuit Amplifier 600 W class D – 4 ohms Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon Pole mount MonoTilt 3°, 15mm Rigging points 3x M8 Enclosure MDF Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 27 cm x 42 cm x 27 cm Weight 11 kg / 24.3 lbs.

PR:O 18 Sub A Frequency response +/- 3 dB 48 Hz – Xover Frequency response -10 dB 38 Hz – Xover Maximum SPL, @ 10% THD 125 dB Connections 2x XLR Kombi Line In balanced,2x XLR L/R Out Mid/High,2x XLR Through balanced LF Speaker 1x18" X-Over 75 Hz – 150 HZ, switchable Subsonic filter 35 Hz Peak limiter yes RMS-Soundlimiter no Amplifier 600 W Class D – 4 ohms Pole mount M20 threaded base plate Handles 2, integrated Enclosure MDF Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 53 cm x 61 cm x 64 cm Weight 39,8kg / 87.8 lbs.

HK Audio PRO210SA. Active loudspeaker 2x10"

HK Audio Performer Satellite 200 watts

HK Audio Soundcaddy One, compakt PA Setup with Mid High Column Speaker and Subwoofer in one unit, integrated 4 channel Mixer, Line Out for a slave Soundcaddy, 600Watt Class D Amp, 6x 3,5" Speaker for Top, 3x 6" for Sub, Frequency 49Hz - 18kHz, 120 dB SPL, dimensions 102 x 27 x 34 cm, weight 29kg, Includes cover

The XBA 18 is the sub-bass enhancement of choice for bands and power DJs seeking a big low-end boost from a powerful, easy-to-use bass bin. Headline The most powerful active sub-bass bin in its class Power Rating 1200 W Frequency response +/- 3 dB 37Hz - x-over Sensitivity 1W 102 dB@10% THD (half space) Maximum SPL, @ 10% THD 130 dB@10% THD (half space) subwoofer amplifier 1200 Watt, class D Connections 2x XLR Line-In, 2x XLR Through LF Speaker 1 x 18" Pole mount M20-threaded plate Casters factory-equipped with 100 mm Handles 3, integrated Optional accessories Protection Cover Enclosure MDF/ Birch plywood Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 53 cm x 63,5 cm x 68,5 cm Weight 55 kg / 122.1 lbs.

designed by the engineers behind industry-leading M-Audio® reference monitors - studio-quality sound; OptImage wave guide technology - wide dispersion angle and excellent off-axis response; 4 specially tuned EQ presets - easily dial in the right sound for any application; Class D amplifier and Neodymium magnet LF driver - extremely light weight; integrated M10 fly-points and 1.4” (36 mm) pole mount - flexible placement in any venue

Designed by the engineers behind industry-leading M-Audio® reference monitors; OptImage wave guide technology - wide dispersion angle and excellent off-axis response; 4 specially tuned EQ presets - easily dial in the right sound for any application; Class D amplifier and Neodymium magnet LF driver - extremely light weight; integrated M10 fly-points and 1.4” (36 mm) pole mount - flexible placement in any venue

Martin Audio DD6 Differential Dispersion technology provides an advanced solution to the requirements of even coverage over wide angles and medium throw distances. Designed using Martin Audio’s in-house BEM (Boundary Element Method) tools, the short throw horizontal dispersion of the horn is 120°, narrowing to 90° as throw increases. Vertically, the horn covers 60º, with greater output above the horizontal centre plane. The combination of narrower horizontal dispersion and greater output above the horn’s horizontal centre plane creates progressively more HF output as the throw distance increases. The resultant dispersion pattern is ideally suited to covering audiences located on flat or gradually sloping surfaces. The comprehensive mounting options offer an incredible degree of flexibility for any application. M8 inserts can be used with eyebolts and there are three dedicated brackets available; a multipurpose vertical tilt bracket which can be attached to the top, bottom or side of the DD6 and can be used with a top hat fitting or scaffold clamp, a yoke for fitting to walls or ceilings in any orientation, and a wall bracket with invisible fitting to a wall

Martin Audio Omniline 4. OmniLine delivers consistent audio coverage with unprecedented accuracy in a wide variety of architectural environments, using only one amplifier channel per array in many applications. By utilising a complement of unique, Martin Audio designed drivers, and mechanical alignment techniques, simple EQ and Limiting is the only processing required. A powerful software application provides extremely accurate intercabinet and array angles, in order to achieve optimum coverage over a predefined area. OmniLine's aesthetically pleasing cabinet is finished in neutral light grey. Each OmniLine array is constructed by connecting together multiple array modules. Up to 32 modules can be connected where both high output and vertical focussing down to low/mid frequencies are required. Smaller numbers of modules (down to 4) can be used for shorter-throw applications, where vertical focussing of these frequencies is less important.

Martin Audio W8L LongBow. Large Scale, Three-Way Line Array Enclosure. The Martin Audio W8L Longbow is an evolution of the successful W8L line array system. It brings a new level of performance to the most demanding sound reinforcement applications such as outdoor festivals, sports stadiums and the largest arenas.

The Martin Audio W8LMD is a mini, wide-dispersion vertically arrayable enclosure. It can be used individually and in small quantities for short to medium throw applications (up to 30 metres) as well as a downfill element for the W8LM. Its 20° vertical dispersion requires fewer cabinets to cover the same area as a conventional line array element, yet it still benefits from the smooth, predictable coverage of a vertically coupled system.

Martin Audio W8LMI. The W8LMI is a compact line array enclosure designed to bring line array performance to small and medium scale applications in the fixed installation market. It features the same acoustic components and construction as the touring W8LM as well as a custom-designed integral flying system tailored to the needs of a fixed installation environment, such as theatres and indoor venues. The flying hardware is rated at 7:1 for 12 cabinets and is compatible with the W8LM flying frame and lifting bar. Following the constant directivity horn design philosophy of the W8L and the W8LC, the W8LMI is a three-way system that combines line array principles with innovative horn loading techniques to produce a next generation, small line array with maximum dynamic impact.

Active Monitor Speaker; Powerful 100W RMS/200W Peak Power Amplifier; 2 x 5" extended range drivers; Molded plastic impact resistant cabinets; Mic/Line XLR balanced and RCA Stereo inputs; Mic/Line sensitivity switch; Line Link out with XLR; Power indication LED with LED Clipping indicator; Place in Profile or landscape positions; Bottom and side fixing mount points