Welcome at DWmusicstore! The biggest online music store of the Netherlands, and the place to be if you are in search of guitars, basses, amplifiers, drums, percussion, studio gear, DJ gear, keyboards, synthesizers, wind instruments and more...

The Icicle is Blue's new stylish USB converter and mic preamp combo that allows you to connect any XLR microphone directly into your computer via USB! The Icicle features a studio quality microphone preamp, 48V phantom power, fully balanced low noise front end, analog gain control, and driverless operation. Setup is a snap!

Neutrik NC5FXX The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. 5 pole female cable connector with Nickel housing and silver contacts. Features & Benefits Unique cage design of female contact for low contact resistance and high integrity Female contact incorporates a solder barrier to prevent solder running into the contact mating area Female connector with improved solid metal latch which is larger and easier to handle Additional ground spring contacts for better shell ground continuity Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well proteced against any damage

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. 5 pole male cable connector with Nickel housing and silver contacts. Features & Benefits Male connector with improved locking recess without "window", more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well proteced against any damage

The RØDE Boompole is a high grade professional boom pole for location recording, machined from high grade aluminium. The boom pole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Extends from 0.84m (33") to 3m (10').

Rode Dead Wombat The DeadWombat windshield is designed for minimising any wind noise when using the RØDE Blimp in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

Rode HS1 headset, Lavalier, PinMic microphones, for AKG : PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000.

Rode Micon 7 adaptor for Rode HS1 headset, Lavalier, PinMic microphones , for Lectrosonics: SM series, UMa series, LMa series, UM450.

Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic Pro 2 metres

The RØDE Mini-Boompole is a lightweight, high grade professional boom pole. The Mini-Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Extends from 0.84m (33") to 2.05m (81").

Rode PSA1 Swivel Mount Studio Arm

Rode SM1 elastic band set (2 pieces of elastic band)

Rode SM2 elastic band set (2 pieces of elastic band)

Rode SM3 elastic band set (2 pieces of elastic band)

Rode SM4 elastic band set (4 pieces of elastic band)

Rode SM5 elastic band set (4 pieces of elastic band)

The SM6 is a high quality suspension shock mount that holds the RØDE NT1-A, NT2-A, NT1000, NT2000, NTK, K2, Podcaster and Procaster microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

It includes an removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.

Rode SVM elastic band set (8 pieces of elastic band)

Rode VM elastic band set (8 pieces of elastic band)

Rode ZP1 pouch voor NT1-A, NT2-A, NT3, NT4, NT5, NT55, NT6, NTG-1, NTG-2, NTG-3, S1, M3

Rode ZP2 pouch voor NTG-2, NTG-3, Videomic

Samson BL3. Ultra-Light Boom Stand

Why get the Samson SP01 Spider Mount shockmount? Studio engineers have long known the necessity for good shockmounts in getting the genuine sound of any microphone. When a microphone picks up an audio signal, It also picks-up unwanted mechanical noise through the microphone stand. This is caused by nearby vibrations - the kick drum, amps, artist's movements, and etc. The Samson SP01 solves acoustic problems so you don't have to resort to electronic solutions, which interfere with the natural sound. Small project studios can now have excellent shockmount protection with the value-packed Samson SP01 Spider Mount.

Samson WS1 Foam Windscreen 5 pack

Shure 36A624 Windscreen For WCM16

Internal grill foam for SM58/BETA58

Shure 49A105 windscreen

Shure 49B105 windscreen

Shure 90A4148 Y cable for VP88 mic

Shure 95A2207C microphone blimp

Shure 95A2208C blimp for PG56/57

Shure 95A2313 SM 58/57 bag

Shure 95B2064 windscreen MX202W white

Shure 95D2203C microphone blimp PG52

The Shure A15AS Switchable In-Line Attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. It is specially suited to reducing the level of a high-output microphone to prevent it from overloading the microphone input of a mixer or recorder in applications with high sound pressure levels. In addition, the A15AS may be used to reduce the level of a line-level mixer output to prevent overloading the aux-level input of a recorder. The A15AS is equipped with a female 3-pin XLR connector on the input side, and a male 3-pin XLR connector on the output side. Attenuation is controlled by a three-position slide switch. The A15AS allows phantom power to pass through from the mixer to the microphone, so it can be used with condenser microphones.

The Shure A15HP in-line filter passes mid and high frequencies while reducing low frequencies. The A15HP helps to eliminate electrical and mechanical noise in an Audio system such as 60Hz electrical hum from AC power lines, low-frequency rumble caused by wind noise or air conditioning system, and stage/floor noise transmitted to a microphone through the microphone stand. The A15HP affects frequencies below 100 Hz. When connected to the microphone input on a typical mixer (800 ohms impedance or higher), the A15HP reduces low frequencies by 12dB per octave. Female XLR to male XLR connector.

The Shure A15LA 50 dB attenuator reduces the level of an Audio signal by 50dB. This allows a line level output such as an aux level output from a mixer or playback device, to be connected to a microphone input on another mixer or recorder. Female XLR to Male XLR. The A15LA can be used with either balanced or unbalanced sources.

The Shure A15PRS reverses the phase (polarity) of a balanced Audio signal. Typical use applications include correcting polarity reversal caused by a wiring error in a microphone cable; connecting an unbalanced high impedance microphone having the “hot” signal on pin 3 to the input of a mixer that requires the “hot” signal on pin 2; and reducing phase cancellation/comb filtering between two signals that are of opposite polarity. An in-line switch permits instant selection of either normal or reversed polarity for comparison purposes.

Stereo microphone adapter for mounting two microphones on one stand

Windscreen with locking feature for use with 545 and SM57, black

Windscreen with locking feature for use with 545 and SM57, grey